freq. range (mhz) isolation (db) insertion loss (db) above 3.0 db phase unbalance (degrees) amplitude unbalance (db) f l -f u max. max. ty p. min ty p. max. 1000-3000 18 15 0.8 1.9 5.0 0.9 TCP-2-33X+ 2 way-0 50 ? 1000 to 3000 mhz power splitter/combiner surface mount typical performance data electrical specifcations maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c power input (as a splitter) 0.5w max. outline drawing outline dimensions ( ) inch mm electrical schematic rev. b m151107 TCP-2-33X+ ed-13156 dy/cp/am 151008 case style: db1627 features ? low insertion, 0.8 db typ. ? excellent amplitude unbalance, 0.3 db typ. ? very good phase unbalance, 1.0 deg. typ. ? external resistor required ? aqueous washable ? leads for excellent solderability ? low cost applications ? cellular ? pcn ? gps pin connections sum port 2,5,6 port 1 3 port 2 4 ground 1 ext. resistor 200 ? 3,4 total loss 3.0 3.5 4.0 4.5 5.0 1000 1500 2000 2500 3000 frequency (mhz) total loss (db) s-1(db) s-2(db) isolation 15 17 19 21 23 25 1000 1500 2000 2500 3000 frequency (mhz) isolation (db) vswr 1.0 1.2 1.4 1.6 1.8 2.0 2.2 1000 1500 2000 2500 3000 frequency (mhz) vswr #s-vswr #1-vswr #2-vswr frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 1000.00 3.65 3.76 0.11 17.21 0.35 1.89 1.42 1.44 1200.00 3.65 3.80 0.15 18.46 0.37 1.85 1.47 1.49 1400.00 3.65 3.85 0.20 19.93 0.41 1.81 1.51 1.54 1600.00 3.67 3.90 0.23 21.66 0.50 1.76 1.56 1.59 1700.00 3.68 3.93 0.25 22.55 0.53 1.74 1.58 1.61 1800.00 3.70 3.96 0.26 23.43 0.59 1.73 1.61 1.64 1900.00 3.71 3.99 0.28 24.14 0.65 1.71 1.63 1.67 2000.00 3.73 4.02 0.29 24.63 0.74 1.69 1.66 1.70 2100.00 3.75 4.05 0.30 24.78 0.82 1.67 1.69 1.73 2200.00 3.78 4.10 0.31 24.62 0.91 1.67 1.73 1.76 2300.00 3.82 4.15 0.32 24.17 0.97 1.66 1.76 1.79 2400.00 3.87 4.21 0.34 23.60 1.16 1.66 1.80 1.84 2600.00 3.93 4.29 0.35 21.94 1.27 1.68 1.88 1.89 2800.00 4.02 4.40 0.38 20.24 1.45 1.72 1.94 1.96 3000.00 4.12 4.53 0.41 18.75 1.73 1.76 2.00 2.00 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. abcde f .160 .150 .160 .050 .040 .025 4.06 3.81 4.06 1.27 1.02 0.64 gh j k wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 total thickness: .013 inches max. sugg ested l a y o ut, t ol eranc e t o be withi n .002 pcb land patter n demo board mcl p/n: tb-464+ suggested pcb layout (pl-357) top hat ? a vailable t ape and reel at no extra cost reel size devices/reel 7? 20, 50, 100, 200, 500 13? 1000, 2000 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
